VIEWSONIC VS12197-1G - Manual (Page 6)

ViewSonic N1930w 4
ENGLISH
Getting Started
Congratulations on your purchase of a ViewSonic ® LCD TV.
Important! Save the original box and all packing material for future shipping needs.
Package Contents
Your LCD TV package includes:
• LCD TV
• Power Cord
• VGA Cable
• Warranty Card*
• Remote Control with batteries
• AV Cable
• RF Cable
• ViewSonic User Guide & Quick Start Guide
Mounting ViewSonic LCD TV to the wall
The LCD TV can be used in a free standing position or wall-mounted. Before installing the
product to the wall, please consider the following guidelines:
• Read the Important Safety Instructions, at the start of this manual.
• Do not install in a moist or wet environment. This equipment is intended for indoor use.
• Do not install near heat source, or strong magnetic fields.
• Use only ViewSonic approved wall-mounting brackets to support the LCD TV weight.
• Before attaching the wall mount plate to the back cover, ensure the product is working.
• If your LCD TV is already set up for free-standing operation, you need to first remove the
stand before mounting the device to the wall.
To attach the wall-mount bracket to LCD TV safely, please use the following guidelines:
• Disconnect the power and any other cables that might hinder moving the LCD TV.
• Set the LCD TV on a table or work surface, placing the screen face down on a towel or
woolen blanket to protect the screen surface from damage while installing plate.
• Please refer the following steps to remove the stand.
Remove the base.It is attached to the stand with 4 screws.
Remove the 4 screws holding the stand to the hinge.
Remove the stand.
1.
2.
3.
* Note: For Hong Kong area, there is no warranty card.