Velodyne Acoustics V E L O D Y N E VX-11 User Manual

Page 4

Congr atulations

w w w . v e l o d y n e . c o m

VX-11 User’s Manual

Congratulations on your purchase of a Velodyne subwoofer system. This system represents the
state of the art in home audio reproduction and will provide you with years of listening pleasure
when properly cared for. Read and follow this instruction manual to insure safe and proper
system connection and operation.

Caution!
Please observe the following instructions to insure safe and proper system operation.

Note: Do not leave unit in direct sunlight or use in high humidity environments!!!

Warning!
To prevent fire or shock hazard, do not expose this equipment to rain or moisture. To avoid
electrical shock, do not open speaker enclosure or amp chassis cover. Please observe all
warnings on the equipment itself. There are no user serviceable parts inside. Please refer all
service questions to your authorized Velodyne dealer.

P r i o r t o I n s t a l l a t i o n :

Please unpack the system carefully. This unit is heavy. Use caution when lifting or moving to
avoid injury. Please save the carton and all packaging materials for future use. Packing this unit
in any other carton may result in severe damage when shipping. Record the serial number in
the space provided on page 12 for future reference.

P r o d u c t F e a t u r e s

• 10” (7.65” piston diameter) subwoofer with 1.6” high-temp voice coil

and 32 ounce motor structure

• High efficiency Class D amplifier
• Adjustable (50 to 200 Hz) low-pass crossover @ 12 dB/octave
• Line-level (RCA) inputs
• Speaker-level inputs and outputs with spring loaded terminals
• Signal sensing auto turn on/off
• Variable volume control
• Selectable phase control (0° or 180°)
• Green power on/ Red power standby mode indicator LED

P r e p a r e f o r I n s t a l l a t i o n

Your new Velodyne subwoofer provides for a number of installation options. Read all the
installation information below in order to determine which installation option is best for your
system. Remember to perform all installation procedures with system power turned off
to prevent possible damage.