Vector ElectroMate VEC095 User Manual
Page 4
4
1 . I N T R O D U C T I O N
Congratulations on selecting the Vector ElectroMate™ Model VEC095
Auxiliary AC/DC Power System. ElectroMate is an advanced power and
jump-start system with unique features that set it far above the value and utility
of ordinary jump-starters, portable tire compressors and auxiliary AC and
DC Power Supplies. It can jump-start any vehicle with a standard 12 Volt DC
electrical system: boat, truck, car, airplane, RV, personal watercraft,
snowmobile, tractor, etc. It supplies AC for 110 Volt appliances to 1000 watts,
and DC for 12 Volt appliances to 30 Amps. It can inflate any sized tire from
small utility trailers to large truck tires. It can inflate most popular inflatable
items such as volley balls, footballs, and beach accessories. This ElectroMate
model is modular in design and can be considered as several interconnected
components. The major components are: Battery, Power Inverter, Automatic
Battery Charger, Tire Compressor and Jump-Start System. Competitive
jump-start and AC and DC power systems are not modular and if there is a
component failure, the entire unit must be shipped for service. Each ElectroMate
component is described in detail in it’s own section of this manual.
(See Figure 1.)
NOTE:
The ElectroMate is shipped without an internal battery. The user
must obtain and install a 12 Volt, deep-cycle, sealed, lead-acid
battery. This battery shape is “Group 27” and are available with
capacities that range from 85 to 125 ampere hours, depending
on local availability.
HANDLE
RELEASE
BUTTON
BATTERY
STATUS
PANEL
FLUORESCENT
LAMP
DC ACCESSORY
SOCKETS
EXTENDED
HANDLE
INVERTER
COMPRESSOR
COMPRESSOR
HOSE STORAGE
DUAL GFCI
OUTLETS
FIGURE 1
COMPRESSOR
ON/OFF SWITCH