VIPowER VPA-3528Net - Manual (Page 16)

ViPowER / 3.5-inch Aluminum HDD NetWork Storage 16
ViPowER / VPA-3528Net User`s Manual
USB Storage Mode
Proceed with the following steps to use the VPA-3528Net NetWork Storage.
Step 1.
Power on the computer.
Step 2.
Plug one end of the power adapter power cord +12V power adapter into an AC
power outlet, and the other end to the +12V power inlet on the rear panel of the
VPA-3528Net NetWork Storage.
Step 3.
Connect one end of the USB cable into the USB port connector on the rear
panel of the VPA-3528Net NetWork Storage, then plug the other end into one
USB port on the back of the computer.
Step 4.
Power ON the VPA-3528Net NetWork Storage. The Power LED indicator on
the front panel of the VPA-3528Net will light after a slight delay. The VPA-
3528Net NetWork Storage is ready to use.
Note:
The device will auto-detect the speed of your USB port and adjust be-
tween USB 1.0 and USB 2.0 speed once the driver is installed.