VTech CS6229-5 - Manual (Page 18)

14
Telephone operation
Mute
The mute function allows you to hear the other party but the
other party cannot hear you.
During a call, press MUTE/REMOVE on the handset. The
handset screen shows MUTED for a few seconds and
MUTE appears until the mute function is turned off.
Press MUTE/REMOVE again to resume the
conversation. The handset screen temporarily shows
MICROPHONE ON.
Ringer mute
When the telephone is ringing, press OFF/CLEAR or
MUTE/REMOVE to temporarily silence the ringer without
disconnecting the call. The next call rings normally.
Call waiting
If you subscribe to call waiting service from your telephone company, you hear
an alert tone if there is an incoming call while you are on another call.
Press /FLASH to answer the new incoming call. Press /FLASH again
to return to the original call.
Find handset
Use this feature to page all system handsets.
Press FIND HANDSET on the telephone base. All idle
handsets ring and the screens show ** PAGING **.
To end paging, press /FLASH, , any dialing keys
( 0-9, #, *), or press FIND HANDSET on the telephone
base.
1.
2.
•
1.
2.
PHONE 0:00:00
MUTED
MUTE
RINGER MUTE