Vision Fitness R2200HRT - Manual (Page 6)

6
3
STEP
• Slide the console mast cover over
the console mast. Guide the console
cable up through the bottom of the
console mast with the attached wire.
• Slide the console mast into the
console mast mounting bracket and
use the 5
MM Allen wrench to secure the
five screws (M8x15L) and lock
washers (M8). Note: The screw
facing the seat does not use a lock
washer. Tighten this screw only until
snug.
• Slide the console mast cover to the
proper position. Attach the front
handlebar to the console mast. Use
the 5
MM Allen wrench to tighten the two
screws (M8x20L) and lock washers
(M8) to secure the handlebar.
• Take out the four screws (M5x12L)
from the back of the console with the
Phillips screwdriver. To attach the
console, plug in the console cable to
the proper position in the back of the
console. Reinsert the four screws
(M5x12L) with the Phillips screwdriver
to secure to the console mast.
• Use the Phillips screwdriver to
attach the water bottle cage to the
console mast with the two included
screws (M5x15L). Insert the water bottle.
PINK BAG
3
STEP