Viking VHB300 - Manual (Page 5)

Using the Blending and Whisk Attachment (Standard Attachments)
1. Insert the stainless steel blending or whisk attachment into the motor
housing.
2. Plug the electrical cord into the appropriate electrical wall outlet.
3. Insert the stainless steel blending or whisk attachment into mixture
for blending.
4. Turn power on by pressing and holding the black buttons in the
middle of the motor body for either speed – top button for low
speed and lower button for higher speed. The button must be
pressed for power, the unit will shut off once the button is released.
5. When blending is complete release power button before removing
blender from mixture.
6. Make sure unit is off and unplugged from power source before
removing attachments.
Note:
The blender should never be immersed into mixtures which exceed the
height of the blending or whisk attachment. Do not submerge the
motor body into any type of liquid or mixture.
5
whisk
gear box
i
stainless
steel whisk
attachment
i
stainless
blending
attachment
i
Stainless Steel
Blending Attachment
Stainless Steel
Whisk Attachment
whisk
gear box
i