VIEWSONIC NextVision N2010 - Manual (Page 19)

E
N
G
L
I
S
H
ViewSonic N2010 18
Turning on the LCD TV
To adjust the function of your LCD TV, you may use the remote control or top panel
buttons above your LCD TV to select input source, change channels, or adjust LCD TV
volume.
Before using the LCD TV:
1. Insert the power plug.
2. Connect external equipment properly.
3. Power On/Off:
Press the
POWER button of the top of the LCD TV or press the POWER button on
your remote control to turn on/off the TV. The power LED indicator lights when the
LCD TV is on.
Volume Adjust
Press or
vol-/+ to adjust the volume.
Channel Select
Favorite Channel Select
The basic operation is as following:
1. Display OSD Menu: press
MENU.
2. Select the OSD page: use .
3. Move the cursor bar up and down: use .
4. Confirm the desired item: press
ENTER.
5. Adjust the condition: use .
6. Back to previous viewed page: press
EXIT.
Basic Operation
Press CH+/- or number key to select your desired channel.
How to select the desired channel by using remote control?
Ex: If your desired channel is 8.
Press
0, and then 8.
(or you may press
8 only)
Ex: If your desired channel is 80.
Press
8, then press 0.
Display the current information, such as input source, channel number, sleep setting, and
sound mode.
The function only works when it is in TV mode. However, in PIP mode, it is unable to use.
Press
INFO, and the current state will be displayed on the screen.
Using the OSD Menu
You can use the OSD Menu and options to adjust various settings by using your remote
control.
V o l u m e
E x i t A d j u s t