Volvo 240 - Manual (Page 100)

1987 Volvo 240
When the primer surface is dry, the paint can be applied using a brush.
Mix the paint thoroughly, apply several thin paint coats and let dry after each application.
pg. 87 Paint touch-up
3 if there is a longer scratch, you may want to mask to protect surrounding paint.
Touching-up damaged paint on fender edges and sills
Material:
Rust remover
Primer-spray
Surface finish - spray
Sand paper (H 150 - 300 grit)
Thinner
Note: When touching-up the car, it should be well cleaned and dry and have a temperature exceeding
60° F (+15° C).
Mask with tape and paper prior to painting larger surfaces. Remove the masking immediately after
application of the last paint coat, before the paint starts to dry.
Touch-up is as follows:
1 Remove paint flakes.
file:///K|/ownersdocs/1987/1987_240/87240_03c.htm (4 of 11)12/30/2006 7:53:32 AM