Other information, Specifications, Preset timing modes – VIEWSONIC E70f+ User Manual
Page 13: Viewsonic e70f+ 10
Other Information
Specifications
1
Macintosh users may need an adapter. Contact ViewSonic (see Customer Support on page 12).
Preset Timing Modes
Full 17” (16.0” viewable diagonal area), 0.21 mm
Horizontal, 0.13 mm Vertical, and 0.25 mm diagonal dot
pitch,
90° deflection
RGB P22 medium
short persistence
Anti-reflection. anti-static, and anti-glare coating
Standard light transmission rate = 5
2%
VGA 640 x 400 @ 70 Hz
VESA
®
640 x 480 @ 60,75, 85 Hz
VESA 800 x 600 @ 75, 85 Hz
VESA 1024 x 768 @ 75Hz
VESA 1024 x 768 @ 85 Hz
VESA 1280 x 1024 @ 60 Hz
Macintosh
®
640 x 480 @ 67 Hz
Macintosh 832 x 624 @ 74.6 Hz
Macintosh 1024 x 768 @ 75 Hz
ViewSonic
E70f+
10
CRT
Type
Phosphor
Glass surface
Input Signal
Video
Sync
RGB Analog (0.7/1.0Vp-p, 75 Ohms
)
f
H
: 30-70 kHz, f
v
: 50-1
60 Hz
H
/ V Separate (TTL), Composite
Compatibility
PC
Macintosh
1
VGA up to 1280x1024, non-interlaced
Power Macintosh
®
(may require Macintosh cable
adapter)
Timing Modes with
Maximum Refresh Rates
2
1280 x 1024 @ 66 Hz
640 x 480 @ 1
33 Hz
1024 x 768 @ 87 Hz
800 x 600 @ 110 Hz
Power
Voltage
AC 100-240 VAC, 50/60 Hz
75W (typical)
Display Area
Default
Full scan
310 mm (H) x 230 mm (V) (typical)
320 mm (H) x 240 mm (V) (depends on signal timing)
Operating
Conditions
Temperature
Humidity
Altitude
41° F to 104° F (5° C to 40° C)
5% to 95% (no condensation)
From -1312 feet to 9,482
.5 feet (-400 m to 3,000 m)
Storage
Conditions
Temperature
Humidity
Altitude
-40° F to +140° F (-40° C to +60° C)
5% to 95% (no condensation)
From -1312 feet to
39,370 feet (-400 m to 12,000 m)
Dimensions
Physical
(monitor)
40
0 mm (W) x 400.98 mm (H) x 428.6 mm (D)
1
5.74” (W) x 15.78” (H) x 16.87” (D)
Weight
Net
14.7 kg / 32.4 lb
Regulations
Power Saving
Modes
On
Off
<
75 W TYPICAL (Green LED)
< 4 W (Orange LED)
Comsumption
UL/cUL, DHHS, FCC-B, ICES-B, NOM, TUV-S
E
NERGY
S
TAR
®
TCO'99, GS, Ergo, CE, GOST-R & Hygienic
Connectors
Input Signal
15 pin mini D-sub
Power
3-pin plug (IEC320)
2
Warning: Do NOT set the graphics card in your computer to exceed these Maximum Refresh Rates;
doing so could result in permanent damage to the monitor.
BSMI, PSB, CCC, VCCI
SASO, PCBC