Vivotek IP71353 - Manual (Page 48)

- 47 -
www.vivotek.com
(note: The return page can be a general HTML
file(.htm, .html) or a Vivotek server script executable
(.vspx) file. It can not be a CGI command. It can not
have any extra parameters. This parameter must be
put at end of parameter list)
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: \r\n
\r\n
where is
=\r\n
>SDUDPHWHUSDLU!@
Only the parameters that you set and readable will be returned.
Example: Set the IP address of server to 192.168.0.123
Request:
http://myserver/cgi-bin/admin/setparam.cgi?Network_IPAddress=192.168.0.123
Response:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: 33\r\n
\r\n
network.ipaddress=192.168.0.123\r\n
- 48 -
www.vivotek.com
Available parameters on the server
NOTE: The bold characters in table are the default value of each parameter.
Group: System
NAME
VALUE DESCRIPTION
hostname
(r/w) than 40 characters> host name of server
<Network Camera >
0 Do not turn off the led indicator ledoff
(r/w)
1 Turn off the led indicator
year, month and date separated by slash.
keep date unchanged
date
(r/w)
Using NTP to sync date/time automatically
hour, minute and second separated by colon.
keep date unchanged
time
(r/w)
Using NTP to sync date/time automatically
ntp
(r/w) address> NTP server
timezone
(r/w) -12 ~ 12 time zone, 8 means GMT +8:00
<8>
updateinterval
(r/w) 0 ~ 2592000 0 to Disable automatic time adjustment,
otherwise, it means the seconds between
NTP automatic update interval.
<0>
serialnumber
(r) 12 characters mac address without hyphen
connected
firmwareversion
(r) than 39 characters> The version of firmware, including model,
company, and version number
restore
(w) 0 Restore the system parameters to default
value.
- User's Manual
VIVOTEK - A Leading Provider of Multimedia Communication Solutions