2 audio setup – Vantec Jukebox User Manual

Page 22

2.2.2 Audio Setup

This is guide for setting up the audio output the AVOX. You can use Stereo or Digital 5.1 ch..

Analogue/DCPM: Select when you connect the supplied AV cables (Red / White) to TV or Audio set directly.

Encoded Digital: Select when you want to listen through 5.1Ch by connecting receiver (or amplifier) with supplied coaxial

cable.

①

Turn on the AVOX and press [SETUP] in

MediaType Selection screen.

②

Move to ‘Audio Setup’ icon and press

[ENTER].
③

Move to Audio Output Mode that you want

and press [ENTER].

④

Finally, press [SETUP] again for saving

configurations.