Venturer PLV16198 - Manual (Page 12)

E - 11
USING HEADPHONES
• Turn down the volume before
connecting headphones to the unit,
then adjust the volume to your
desired level.
• When headphones are connected,
no sound will come from the front
speakers.
NOTE:
Avoid listening to sound at high levels
for prolonged periods of time. This
may be harmful to you and may
cause hearing loss.
CONNECTIONS
CONNECTING AN AUDIO AMPLIFIER
This connection allows you to use an audio amplifier and external speakers.
Connect the AUDIO cable (not included) as shown.
Make sure you connect the cable from the other equipment (AUDIO IN) to this unit (AUDIO OUT).
CONNECTING THE AC POWER CORD
• Connect the AC power cord into a wall outlet.
• Press the STANDBY / ON button on the left side of the unit or use the remote control to turn on the unit.
NOTES:
• TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF WALL OUTLET,
THEN FULLY INSERT.
• When the AC power cord is plugged
in, the unit is not completely
disconnected from the main power,
even when the power is turned
off.
• Be sure the AC power cord is
disconnected and all functions are
off before making connections.
• Make sure all components are
connected correctly.
• When you are not going to use the
unit for a long period of time,
disconnect the AC power cord.
To AC wall outlet
Headphones
(1/8” [3.5mm]
diameter plug)
To AUDIO IN jacks
To AUDIO
OUT jacks
PLV16198S2_01-11.pmd 9/7/2007, 12:30 PM 11