VTech LS6426-3 - Manual (Page 31)

27
Multiple handset use
Push-to-talk (PTT)
You can directly broadcast messages from one handset to the
speakerphone of one or multiple handsets. Press and hold
PUSH TO TALK to begin two-way communication. If only one handset
is available or registered, the handset screen shows
PTT requires two handsets when you press PUSH TO TALK.
Only one handset can talk at a time. To do so, press and hold
PUSH TO TALK while you are talking.
You must release
PUSH TO TALK, so the other person can respond.
Only one PTT session can be active at a time.
While PTT is in use between two handsets, other handsets cannot
use the intercom feature.
If you attempt to place a PTT call to another handset that is on an
outside call or intercom call, or accessing the answering system,
your handset displays Not available at this time.
Turn PTT on or off
Press PUSH TO TALK when the handset is not in use.
The PUSH TO TALK menu displays.
Press or to highlight >PTT On/Off, then press
MENU
/SELECT.
Press or to choose >On or >Off, then press
MENU
/SELECT.
When PTT is turned off, the handset shows No Incoming PTT while the phone is
not in use.
•
•
•
•
•
1.
2.
3.
PUSH TO TALK
>PTT On/Off
INCOMING PTT
>On
PUSH TO TALK
>PTT On/Off
INCOMING PTT
>On
PUSH
TO
TA
LK
PUSH
TO
TA
LK