beautypg.com

Vivitar Vivicam T135 User Manual

Page 17

background image

16

Flash Options

There are several Flash options available on your camera. The options appear on the Photo

Capture Mode LCD screen in sequence.

To change the Flash mode, press the LEFT Quick Function button until you arrive at your desired

settings.

NOTE: Flash is available only in 2D Photo Capture Mode. There is no Flash in 3D Photo Capture

mode.

Important: When using Flash, stand between 8 to 10 feet away from the scene you would like to

capture.

Flash Type

Description

Forced Off (Default)

No flash will appear.

Use this when you do not want to activate Flash.

NOTE: A „Turn On Flash‟ message appears when the camera

detects a need for flash. When this message appears, it is

recommended to press the Flash/Up button and select one of the

flash options: Auto Flash, Forced On or Red-Eye Reduction.

A

Auto Flash

When you want the camera to determine if Flash is needed, select

Auto Flash.

The flash will automatically turn on according to the lighting

conditions.

When the LED light stops blinking, the Flash is ready for use.

Note: In some cameras, an initial flash appears to test your

lighting conditions. If flash is needed, a second flash will appear

upon taking the photo.

Forced On

The flash is enabled for each photo.

Note: If you use this option in a well lit environment, your photo

may be appear too bright/light (overexposed).

Red Eye Reduction

Eliminates the red-eye effect in a photo caused by flash.

Hide/Show the LCD Icons

The display of the icons on the LCD screen can be hidden or visible as desired.

1)

Hold the MODE button for 2 seconds to hide the display of the icons on the screen.

2)

Press the MODE button again to redisplay the icons on the screen.