VTech 2625 - Manual (Page 23)

23
Clear Message Waiting
If, after reviewing all new voice mail
messages, the Message Waiting alert still
remains on the screen and the
LED
on Base is still flashing, you can manually
remove the indication from the screen and
turn the LED off.
•
From the idle (OFF) mode, press SEL
then
or key to CLEAR MSG
WAIT.
• Press SEL then the display will ask
you TURN INDICATOR OFF? Press
SEL again to confirm with confirmation
tone. To exit, press OFF.
Dial Type (preset to Tone)
• From the idle (OFF) mode, press SEL
then
or key to DIAL TYPE.
• Press SEL then use or key to
scroll to TONE or PULSE.
• Press SEL to confirm your setting.
NOTE: When the phone is set for pulse
dial mode, it is possible to switch to
temporary tone mode during an
ongoing call by pressing
. Once
pressed, tone will be used for rest of
the call. After you hang up, the phone
will return to pulse dialing for the next
call.
Handset Settings
>CLEAR MSG WAIT
DIAL TYPE
TURN INDICATOR
OFF?
>DIAL TYPE
PHONE BOOK
DIAL TYPE
PULSE
Basic Operation