VTech VT 9122 - Manual (Page 7)

7
LANGUAGE SELECTION
1. Press PROG/CHAN, display shows “SET LANGUAGE?” and
the current setting (ENGLISH / FRANCAIS / ESPANOL) is
displayed.
2. Press or to cycle through the different language settings.
3. Press SELECT to confirm your choice.
PROGRAM LOCAL AREA CODE
1. Press PROG/CHAN repeatedly, until display shows “SET
AREA CODE?”
2. Press numeric keys 0~9 to enter the local area code.
3. Press SELECT to confirm your input.
After programming your LOCAL area code, all local caller ID records will be stored without
the area code.
RINGER SELECTION
1. Press PROG/CHAN repeatedly, until SET RINGER? and the
current ringer setting (ON or OFF) is displayed.
2. Press or to cycle through the different ringer settings.
3. Press SELECT to confirm your choice.
TONE/PULSE SELECTION
NOTE: Your VT 9122 is factory-preset for TONE dialing.
1. To change dialing mode, press PROG/CHAN repeatedly, until
SET DIAL TYPE: TONE (or PULSE) is displayed.
2. Press or to choose TONE or PULSE.
3. Press SELECT to confirm your choice.
GETTING ST
AR
TED
SETTING UP YOUR VT 9122