Vision Fitness TM357 - Manual (Page 10)

6
ALL MODELS
POWER SWITCH
Ensure that your Treadmill is
properly connected to a power
outlet, then turn on the Power
switch, located at the front of the
main frame.
SAFETY MAGNET KEY & CLIP
Your VISION FITNESS Treadmill
will not start unless the Safety
Magnet Key is inserted into the
circle in the front of the console.
You should attach the clip end to
your clothing. If at any time you
need to stop the Treadmill quickly,
simply pull the Safety Magnet Key
off the console. This will cut all
power to the Treadmill, and it will
come to a complete stop. To
resume your workout, place the
Safety Magnet Key back in place.
This will send you back to the start-
up mode.