Vantec NST-360FBSU-BK - Manual (Page 9)

Installation
7
(1) Connect the SATA connector and power cable to
the hard drive as pictured below.
( pic 5.1-B )
(3) Secure the hard drive onto the drive caddy with the
screws provided.
(4) Insert the drive caddy back into the aluminum housing.
Be sure to reconnect the LED cable before closing the unit.
When reinserting the caddy, also be sure to align the top
of the caddy with the guides on the housing.
( pic 5.1-D )
(2) Align the hard drive mounting holes with the
holes on the back of the drive caddy.
( pic 5.1-C )
Installing the hard drive in the NexStar 3:
( pic 5.1-B )
( pic 5.1-C )
( pic 5.1-D )