Vita Spa LD-15 Series - Manual (Page 7)

Getting Started:
NOTE:
For best results, read each step carefully and entirely before proceeding to the next.
FILL YOUR SPA
Wipe the interior of the spa with a damp, soft cloth to remove any residue that may be
on the surface. Fill with a garden hose. As the spa is filling check in the equipment access
area for any leaks. On occasion, it may be necessary to hand tighten a union fitting that
may have come loose during transit. Also check that the gate valves are pulled out to the
open position and that the hose bib is closed. Continue to fill to the water level line.
NOTE: If your water is extremely hard, it is preferable to fill the spa halfway with hard
water and the rest with softened water.
NEVER FILL THE SPA ENTIRELY WITH SOFTENED WATER.
ADD START UP CHEMICALS
Carefully follow the directions and add the start-up chemicals recommended to you by
your dealer. Contact your dealer to clarify any questions you may have.
— 6 —