Vestax PMC-07ProISP - Manual (Page 6)

5
!5 METER SELECT SWITCH
Selection for LED to represent each program or
the level of the master output.
!6 POWER LED
Illuminates when power is on.
!7 FADER REVERSE LED
Illuminates when respective faders are in
reverse mode.
!8 LED LEVEL METER
Displays level of signal for each program or
master out (determined by METER SELECT
SWITCH (
!5).
!9 IF (INPUT FADER)
This faders controls level of input signal for
each program. This fader is easily replaced by
user. Use IF-07PCV or IF-07PRO as
replacements. See "HOW TO CHANGE THE
FADER UNIT".
@0 CF (CROSS FADER)
Used to mix sound between PGM1 and 2, also
detachable and easily replaced with CF-05PCV
or CF-05PRO.
@1 MONITOR LEVEL FADER
Controls level in headphones.
@2 CF MONITOR
Crossfades signal to be monitored from each
program.
q EFFECT SEND MASTER VOLUME
Adjusts the output level of the EFFECT SEND.
w EFFECT RETURN VOLUME
Adjusts the input level from the EFFECT
RETURN.
e EFFECT RETURN EQUALIZER
HI and LO frequency adjustment of effects
signal.
r EFFECT RETURN ASSIGN SWITCH
The switch selects return point of effects.
PGM1 Assigns effects to the Q-stick
on PGM1.
PGM2 Assigns effects to the Q-stick
on PGM2.
MASTER Assigns effects to pre-master
fader.
t PROGRAM GAIN VOLUME
Adjusts the input level of each program. The
INPUT LEVEL METER (
!8) should be at 0dB
when the INPUT FADER ( !9) is at 7 or 8
position.
y 3 BAND EQUALIZER
Adjusts HI, MID and LO frequencies on each
program.
u PROGRAM EFFECT SEND VOLUME
Adjusts the send level for each program
individually. When this volume is minimum, the
same effect is off.
i PROGRAM REVERSE SWITCH
Switches PGM1 and 2 simultaneously.
o MASTER TRIM VOLUME
Trim adjustment for master level fader.
!0 MASTER FADER
Adjusts overall master output level.
!1 SESSION MIX VOLUME
Adjusts the input level of SESSION IN JACKS
(
#5, #6).
!2 MONITOR SELECT SWITCH
This allows monitoring of the MASTER OUT
(
#1,#2) or the CF MONITOR (@2).
!3 Q-STICK ON/OFF SWITCH
When this switch is on, the Q-stick functions.
When this switch is off, the Q-stick does not
function.
!4 Q-STICK(Quadraphonic Stick)
Controls the volume sent to the four speakers
or zones.