VIEWSONIC PT775 - Manual (Page 8)

7 ViewSonic PT775 Operation
Operation
The buttons on the Front Control Panel and the OnView ® controls allow you
to adjust your ViewSonic PT775 monitor (see below).
Front Control Panel
1 Press button [1] to display the
Main Menu.
2 Press the [ ▼ ] or [ ▲ ] button to
highlight the option that you
want to adjust.
3 Press button [2] to display the
highlighted control. See the
next few pages for individual
control screens.
Power
switch Power
LED
• Scrolls up to highlight option
• Increases value of selected option
• Displays Contrast control screen
• Scrolls down to highlight option
• Decreases value of selected
option
• Displays Contrast control
screen.
• Selects a highlighted option
• Shows another control screen
• Shows Input Select control
screen (page 10)
• Displays Main Menu
• Exits control screens
OnView Main Menu, Part 1
4 Press the [ ▼ ] or [ ▲ ] button to adjust
the selected option.
5 Press button [1] to exit control
screens and the Main Menu, parts
1-3.
All OnView menus and screens
clear automatically approximately
20 seconds after a button is pressed.
All adjustments are saved.
c
SELECT: 2
MAIN MENU [ 1 ]
CONTRAST/BRIGHTNESS
H.SIZE/POSITION
V.SIZE/POSITION
PINCUSHION/PIN BAL
TRAPEZOID/PARALLEL
HOURGLASS/HOOKING
EXIT: 1