Vivitar DVR 810HD - Manual (Page 12)

11
Press the Power button to turn your DVR camera off. The DVR camera will switch off.
If the DVR camera is not in use or in an operation mode for 60 seconds it will switch
off automatically.
When there is insufficient battery power, a
“Low Battery” message will appear on the LCD
screen. The camera will automatically power off a few moments later
.
Capturing Videos
In order to capture videos (with audio) using your camera you need to turn the dial to
the Video mode. This camera requires a compatible SD card of up to 8 GB for normal
operation.
The video icon will now appear on the top left corner of the LCD.
1. Press the Record button to the right of the dial to start shooting.
2. A icon will appear and begin to flash. The elapsed time of the video will
appear on the top right on the LCD.
3. Press the Record button again to stop the recording.