VIEWSONIC EXES-2000 - Manual (Page 34)

4. To register stations having consecutive station numbers for this function,
5. Re-start at Step 1 when mis-dialing occurs. (All other registrations remain
valid.)
NOTES
1. All the stations are registered for this function when initial set-up is made.
2. To cancel at one time the data programmed into all the stations for this
function,
12. REGISTRATION OF STATIONS TO REFUSE ALL-CALL PAGING
REGISTRATION OF STATIONS
TO REFUSE ALL-CALL PAGING
Step 1 Dial
Function code
New registration?
Yes. No.
Registration
Step 2
(allowed station No.)
Dial
plus
Confirmation
tone
Repeat twice.
Step 2
(allowed station No.)
Dial
plus
Confirmation
tone
Repeat twice.
Registration finished?
No.
Yes.
Registration of next allowed station.
Other registration mode
or registration finished.
Dial
10 times
(Confirmation tone
will be heard.)
3. To register all the stations for this function,
Dial
10 times
(Confirmation tone
will be heard.)
Depress the key steadily.
Dial
First station No. Last station No.
Repeat twice.
– 33 –