Venturer PLV16070 - Manual (Page 10)

- 9 -
PoWer SuPPly
Using the AC Adapter
The supplied 9V adapter operates on AC 120V ~ 60Hz.
cautions:
• The AC power adapter included with this unit
is for its use only. do not use it with other
equipment.
• To prevent electrical shock, match wide blade
of plug to wide slot of wall outlet, then fully
insert.
• When the unit is not going to be used for long
time, disconnect the AC power adapter from the
AC power outlet.
• When the AC power adapter is plugged in, the
apparatus is not completely disconnected from
the main power supply, even when the power is
turned off.
• The AC power adapter shall not be exposed to
dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on
apparatus.
To DC IN
9-12V jack
To AC
outlet
AC Power Adapter
WarninG:
disconnect the car power
adapter when not in use. Not
for use in 24V vehicles.
fuse replacement instructions
Fuse Press and hold
Press and hold caution:
For continued protection against risk of fire,
replace only with same type and rating of fuse.
Using the Car Power Adapter
The 12V car power adapter allows the unit to be used with vehicles that have a 12V, negative ground
electrical system.
To DC IN 9-12V jack
Car Power Adapter
To the cigarette
1
lighter socket
Warning:
The AC power adapter is used as disconnect device and it should remain readily operable during
intended used. In order to disconnect the apparatus from the mains completely, the AC power
adapter should be disconnected from the mains socket outlet completely.
note: It is not possible to satisfactorily receive ATSC TV signals while in motion - the car power
adaptor is intended for uses such as “tail-gating”.