Velodyne Acoustics SUBCONTRACTOR SC-600 - Manual (Page 19)

16 w w w . v e l o d y n e . c o m
SC-600 Amplifier User’s Manual
Specifications SC-600 IW (In-Wall) SC-600 IF/IC (In-Floor/In-Ceiling)
Woofer: Two 6.5" active drivers
Two 12.5" x 3" passive radiators
12" (9.7" piston diameter) subwoofer
Frequency Response:
(+/-3 dB)
37-120Hz 25-120Hz
Harmonic Distortion: <5% (typical) <5% (typical)
Magnet Structure: 56 oz.
(3.5 lbs.)
Voice Coil: 2” Dual Layer
inner/outer wind
2.5" Dual layer
inner/outer wind
Dimensions (H/W/D):
(inc. feet & grille)
16.5" x 14.25" x 3.75"
(42 x 36 x 10 cm)
**excludes grilles, mounting tabs, etc.
9.3" x 14.0" x 34"
(24 x 36 x 86 cm)
**Allow 1-2 extra inches in depth for wire
Cabinet: Active/Passive Slotted bass reflex enclosure
Warranty:
(parts/labor)
22 lbs. (9 Kg) 40 lbs. (18 Kg)
Specification SC-600 Subwoofer Amplifier
Amplifier:
(Class A/B)
400 watts Dynamic
200 watts RMS Power
High Pass Crossover: 80Hz (6 dB/octave)
Low Pass Crossover: 30Hz-160Hz, Defeatable,
24 dB/octave slope
Inputs: Line and Speaker Level
Outputs: Line-level, 80 Hz up,
speaker level
Phase: 0°, 90°, 180°, 270°
Dimensions (H/W/D):
(inc. feet & grille)
4.25" x 17.0 " x 13.0"
(11 x 43 x 33 cm)
**Allow two extra inches in depth for wire
connectors and power cable.
**Includes feet. Feet can be removed for
rack mount use. Unit is approximately
“two rack units” high.
Warranty:
(parts/labor)
Shipping Weight:
(approx.)
25 lbs. (22.7 Kg)
The following subwoofers are designed to work with the SC-600 amplifier:
Shipping Weight:
(approx.)
64 oz (4 lbs) each
active / 128 oz (8 lbs) total
Three years (electronics - parts and labor),
Five years (drivers - parts and labor)
Three years (electronics - parts and labor),
Five years (drivers - parts and labor)
Three years (electronics - parts and labor),
Five years (drivers - parts and labor)
Specifications