Vinotemp VT-34 TS - Manual (Page 9)

9
9
1 7 6 3 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
i n f o @ v i n o t e m p . c o m
• To unlock the control panel, press and hold the down arrow button and
up arrow button for 3 seconds. The control panel will beep and blink
indicating that the control panel is active and the settings can be
changed.
Important: In order to operate efficiently, this product should be in an
environment with an ambient temperature of less than 110°F.
CLEANING AND CARE
• Always unplug the wine cellar before cleaning.
• Do not use benzene, scrubbing brushes or chemical cleaners as these
will damage the unit.
• Use only a mild, nonabrasive cleanser to clean the exterior of the
cabinet.
• Clean the stainless steel door and handle by wiping with a warm water
and baking soda solution. The solution should be about 2 tablespoons
of baking soda to a quart of water.
• Wash the racks with a mild detergent solution.
• Always dry all parts with a clean dry cloth before plugging the wine
cellar back into the receptacle.
MOVING YOUR WINE CELLAR
• Always unplug the wine cellar before moving.
• Always remove all bottles before moving the wine cellar.
• Securely tape down all loose items (shelves) inside your appliance.
• Tape the door shut.
• Be careful of cabinet legs to avoid damage when moving.
• Be sure the wine cellar stays in the upright position during
transportation
• Protect the outside of appliance with a blanket or similar item when
moving as needed.