Vivitar DVR 740HD - Manual (Page 9)

8
Powering ON/OFF Your Digital Video Camera
 Make sure the batteries have been inserted properly into your digital camera.
 Make sure an SD card (Class 4 or above) has been inserted into your camera.
(SD card up to 32GB - SD Card not included)
Powering the DVR ON
Press the Power button to turn your camera ON.
The camera will be in Video Capture mode to start.
Powering the DVR OFF
While the camcorder is on, you can press the Power button again at any point to turn your
camera OFF. You will see a “Goodbye” splash screen and then the camcorder will power off
completely.
Note: Your digital video camera also has an Auto Power Off feature that will automatically turn off your
camera after 3 minutes that your camera is left idle.
Changing DVR Mode
Your digital video camera has three main modes to capture and view your images:
1) Video Capture Mode - Use this mode to capture videos with your camera.
2) Photo Capture Mode (DSC) - Use this mode to capture photos with your camera.
3) Playback Mode (for photos and videos) - Use this mode to view the photos and videos you have
already taken with your camera.
In addition, the mode list includes the Setup Mode, which allows you to customize your camcorder
settings.
When the camera is first powered ON, the Video Capture Mode will be active.