VIEWSONIC VT2730 - Manual (Page 30)

25
ENGLISH
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic VT2730
Using the TV Features
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the Power button on the front of the
panel.
Operation
Initial Setup
(Setup Wizard only appears when first turning the TV on and without channel scanning.)
1. Press the POWER button on the remote control. The Setup Wizard window will be display.
2. Press ◄ or ► to select OSD language, then press ENTER,◄ or ► to confirm the
selection, and press ENTER once more to go to next step. To change the selection, press ▲
or ▼. To return to the previous page, press MENU.(See Figure1)
3. Select Time Zone of your location. To press ▼ to setup DST (Daylight Saving Time) and
select On or Off with ◄ or ►, according to the time zone of your area. To press ▼ to setup
Time Format, and select 12-hour or 24-hour with ◄ or ►, then press ENTER to continue.
(See Figure2)
4. Select TV Source from Air or Cable, then press ENTER to continue. (See Figure3)
5. The Initial Setup will be completed after Cannel scanning is finished. To interrupt the
scanning, press MENU at any time. (See Figure4)
Figure 1 Figure 2
Figure 3 Figure 4