VIEWSONIC VX900 User Manual

Page 9

Do the following to adjust the screen image:

To display the Main Menu, press button [1].

NOTE:

All OnView menus and adjustment screens disappear automatically

after about 30 seconds.

To select a control you want to adjust, press

▲

▼

to scroll up or down the

Main Menu.

After the control is selected, press button [2]. A control screen like the one
shown below appears.

To adjust the control, press the up

▲

or down

▼

buttons.

To save the adjustments and exit the menu, press button [1] twice.

The following tips may help you optimize your display:

• Adjust your computer's graphic card so that it outputs a video signal 1280 x

1024 @ 60 Hz to the

LCD display. (Look for instructions on “changing

the refresh rate” in your graphic card's user guide.)

• If necessary, make small adjustments using H POSITION and V POSITION

until the screen image is completely visible. (The black border around the
edge of the screen should barely touch the illuminated “active area” of the
LCD display.)

The

▼

down

arrow decreases,

▲ up arrow
increases

The line at the
bottom of the
screen tells you
what you can do
next: Exit or select
the Brightness
control.

ViewSonic VX900 8