Velodyne Acoustics DECO - Manual (Page 5)

Page-3 Page-18
SPECIFICATIONS FOR THE DECO SATELLITES
Woofer: 4” Magnetically shielded woofer 3.5” piston
diameter with cast aluminum basket, poly
coated fiber cone and rubber surround
Tweeter: 1” Silk dome tweeter .95” piston diameter
with shielded neodymium magnet and
ferrofluid cooling
Crossover: 18 dB/octave @ 2500 Hz
Sensitivity: 88 dB for 2.83 volts @ 1 meter
Impedance: 4 ohm nominal*
*Compatible with most 4/6/8 ohm receivers and amplifiers.
Check the owner’s manual supplied with your receiver for
more information.
Protection: Automatic resetting solid state “muting” device
Frequency Response: 110 Hz to 20 kHz (+/-3 dB)
Recommend Amplifier Power: 25 watts to 150 watts
Inputs: Gold Plated Binding Posts
(Accepts bare wire or banana plugs)
Warranty: Five years
Enclosure Dimensions (H,W,D): 8.0” x 5.5” x 6.0”
Weight (ea., unpacked): 4.6 lbs [2.1kg]
Specifications are those in effect at the time of printing. Velodyne Acoustics, Inc. reserves the right to change specifica-
tions or appearance at anytime without notice.
Note: After you unpack the DECO Home Theater System, locate the serial number
on the back of one of the speakers, record it on page 20 of this manual and
register on-line on our website at www.velodyne.com.
The DECO 8 Home Theater System contains the following items:
c) 30 ea. Rubber Feet
x20 Small
x10 Large
d) 1 ea. 16 ft. RCA Cable
b) 1 ea. DECO 8 Subwoofer
a) 5 ea. DECO Satellites
e) 1 ea. Owner’s Manual