Vision Fitness X70 - Manual (Page 11)

7
IN
TR
O
STABILIZING THE ELLIPTICAL TRAINER
After positioning the Elliptical
Trainer in its intended location,
check the unit’s stability. Rocking
or wobbling indicates that your
Elliptical Trainer needs to be
leveled. Determine which leveler
is not resting completely on the
floor. Loosen the nut at the base of
the leveler to allow the leveler to
rotate. Now rotate the leveler to the
left or right until the Elliptical Trainer
is stable. Lock the adjustment by
tightening the nut against the rear
foot support.
SELF-POWERED FEATURE
The X70 is self-powered, requiring no external power source. When a
user strides at a speed above 40 strides per minute (SPM), the power is
generated to allow the Elliptical Trainer to function properly. Because of
this self-generating feature, the console feedback will fade away when
you cease pedaling. The console does, however, use a 9-volt battery as
backup to save your feedback information for 30 seconds from the time
you stopped striding. If you resume striding within the 30 seconds, the
information will reappear. If the information does not appear within the 30
seconds, your battery may need to be plugged in or replaced.
X70_091104.indd 7 11/4/09 11:33 AM