Vivitar ViviCam V15 - Manual (Page 18)

17
5%-35%
power less than
5% power
Capturing Photos
TAKING INDIVIDUAL PHOTOS
You can compose your shot using the LCD screen.
Hold the camera steady and press the shutter button. A
beep will sound and
the red LED indicator on the front
of the camera will light up, indicating that the photo has
been taken. Do not move the camera until you hear the
beep. Moving the camera while taking the picture will
cause the photo to blur.
After each photo is taken the number of photos left to
shoot at this resolution is displayed at the bottom left of
the LCD screen.
If the level of brightness is too low, two quick beeps will
sound, indicating that the photo cannot be taken.