Troubleshooting – Vivitar VIVICAM DVR510 User Manual
Page 32
31
Troubleshooting
Power does not turn on.
1. The Battery is inserted in the wrong direction.
★Reload battery in the correct direction.
2. The Battery has insufficient power to power on.
★Replace or recharge the battery.
The camcorder does not take pictures.
1. The Memory is full.
★Insert a new memory card.
2. The Memory card is not formatted correctly.
★Format the memory card again or use a new
card.
Image is blurry or out of focus.
1. The video camcorder was moving when the
image was captured.
★Hold the video camcorder steady when shooting
picture.
Images were deleted by mistake. Can I retrieve them
1. Photos were deleted by mistake and have been
removed from where they were located on the
computer.
★ All deleted images can be found and retrieved
from the Recycle or Trash Bin.
Recorded images are not saved in memory.
1. The video camcorder was turned off before the
images are saved in memory.
★If the battery low indicator appears on the LCD
monitor, replace the batteries immediately.
A00-090910GES