Viking DFBB363 - Manual

P L A N N I N G A N D D E S I G N G U I D E
V I K I N G R A N G E . C O M • 1 - 8 8 8 - V I K I N G 1
R E L E A S E D 1 2 / 1 / 0 7
© 2 0 0 7 V R C — INFORMATION SUBJECT TO CHANGE
CUSTOM PANEL–REFRIGERATION
Built-In 36”W. Bottom-Mount Refrigerator/Freezer—DFBB363
35-1/4”
(89.5 cm)
23-1/16”
(58.6 c
m)
3/4”
(1.9 cm)
35-1/4
” (89.5 cm)
34-3/8
” to notch
(86.6
cm)
3”
(7.6 cm)
5/8”
(1.6 cm) 51-7/8”
(131.8 cm)
51-1/4”
(130.2 cm)
3/4”
(1.9 cm
)
Note: Corner notch is for left
hinge door
. (Reverse for r
ight
hinge)
See cutout
instructions in installat
ion
man
ual
Note: Inset shown
upside down
1-13/16”
(4.6
0 cm)
5/8” 5/8
” (1.6 cm) (1.6 c
m)
3”
(7.62 cm)
3/32”
(.24 cm)
5/8
”
5/8”
(1.6 cm)
Note: Panel overlays must be dry, solid, straight one piece panels. The use of multiple panel pieces to achieve the dimensions is not
recommended.
Note: A 1/4” wood filler or insulation filler must be used between the door and 3/4” wood panel to prevent condensation from form-
ing. The dimensions of the 1/4” wood filler are 1/4” smaller than the dimensions shown on the top, left and right side. At the bottom,
the 1/4” back panel should be 5/8” smaller than the dimensions shown.
Dimensions & Specifications
DFBB363
Overall panel width 35-1/4” (89.5 cm)
Overall panel height
Refrigerator front 51-7/8” (131.8 cm)
Freezer front 23-1/16” (58.6 cm)
Overall panel depth 3/4” (1.9 cm)*
Maximum panel weight
Refrigerator front 45 lbs. (20.4 kg)
Freezer front 20 lbs. (9.0 kg)
*Panel thickness must not exceed 1” (2.5 cm) on hinge side. Thicker panels will interfere with door swing and clearance.
CUSTOM PANEL DIMENSIONS
DFBB363