beautypg.com

Philips SRU9400 User Manual

Page 4

background image

4

Placing the Batteries in the Remote Control

1

Press the battery cover at the back of the remote control inwards and
slide it in the direction of the arrow.

2

Place the three L06 or AA type alkaline batteries into the battery
compartment, as shown.

3

Slide the cover back on and click it firmly into place.
After a few moments, the first page of the TV touch screen keys appears.

Replacing Batteries
When the batteries are almost empty, the

Battery Low

icon appears.

Please replace the batteries with new L06 or AA type alkaline batteries and
follow the local regulations for disposal of the empty batteries.

Setting Up the Remote Control

Installing Your Devices

To operate a non-Philips device with this remote control, you need to enter
the brand-specific set-up code for that device.You can find a list of set-up
codes at the back of these Instructions for Use.

1

Use the Mode key to select the device that you want to operate.
The Device indicator lights up.

2

Press and hold

for 3 seconds.

The Set-up menu appears.

3

Press in

the

Set-up menu.

A numeric pad appears.

4

Look up the brand of your device and the
corresponding 4-digit set-up codes at the back of
these Instructions for Use.

5

Enter the first 4-digit set-up code on the numeric
pad.
If the IR-code set is activated, the Code key blinks
twice.The last accessed page of the device appears on
the touch screen.
-or-
If the IR-code set is not activated, the Code key blinks once.
Check the set-up code and try entering it again.

6

Test if the keys work with your device.
If the device is not responding to the SRU9400, repeat the instructions
from step 2 onwards, and try entering the next set-up code that is listed
with the brand of your device.

Repeat instructions 1 to 6 for each device that you want to operate.
You can select a different device with the

Mode

key.

SRU9400_IFU_EU_v10.qxd 03-08-2006 10:53 Pagina 4

This manual is related to the following products: