Vector VEC270MG - Manual (Page 11)

Page 11 of 16
260 PSI AIR COMPRESSOR CORDLESS
y RECHARGEABLE VEC270MG
After the battery is charged, the inflator is ready for use. If the battery has not been
charged, please see section 3.1 120 Volt AC Charging before continuing.
1. Remove valve stem cap and attach the universal adapter from the air
inflator to the valve stem with the lever in the up position. Be sure to press
universal adapter down over valve stem threads completely. Press down
on the universal adapter's lever to lock onto valve stem when the adapter is
firmly in place, (See FIGURE – need artwork).
2. To use the inflation accessories, insert piece into the universal adapter and
push the lever to lock into place. The inflation accessory will fit securely.
3. Insert the appropriate inflation accessory into the inflatable object.
4. Turn on the power and the compressor switch.
5. When the object is firm, turn the inflator off.
4.1. Tire Inflation or Products With A Valve Stem
The built-in 12 volt DC 260 PSI Air Compressor is the ultimate compressor for most
vehicles, trailer tires and recreational inflatables.
1. Place connector (chuck) on valve stem.
2. Ensure connector is pushed on to valve stem as far as possible before
closing thumb latch.
3. Make sure latch is secure.
4. Check pressure with the pressure gauge.
5. When desired pressure is reached, open thumb latch and remove
connector from valve stem.
6. Turn OFF Compressor Power Switch.
7. Allow unit to cool after use, before storing away.
8. Store compressor hose and tire fitting in storage compartment.
TYPICAL INFLATION TIMES FOR PRODUCTS W/ VALVE STEMS
TIRE SIZE PRESSURE TIME FROM “0
155/80R 13" 26 psi 2.50 min.
185/70R 14" 30 psi 4.50 min.
235/75R 15" 30 psi 6.50 min.
235/85R 16" 50 psi 16.00 min.
BICYCLE TIRES
27 x 1" racing 70 psi 2.30 min.
4.2. Other Inflatables Without Valve Stem
Inflation of other items requires use of one of the adapters (nozzles).