VIEWSONIC WPD-100 VS13789 - Manual (Page 20)

ViewSonic WPD-100 14
And here are descriptions of every setup item in setup area:
Item Name
Description
Sorted by >> You can decide how to sort all listed access point by
‘SSID’, ‘Channel’, or ‘Signal’ (signal strength).
Show dBm Check this box to show the signal strength of access
point, instead of percentage.
Rescan Click this button to rescan access points. You can click
this button for several times, if the access point you wish
to use does not show in the list.
Add to Profile You can store a specific access point to profile, so you
can link to that access point directly next time, without
inputting authentication key again.
To add an access point to profile, you have to select an
access point from the list first, then click ‘Add to Profile’
button. Detailed instructions will be given below.
Connect Connect to a selected access point. You have to select
an access point from the list first and then click ‘Connect’
to connect to the selected access point.