Video Products RJ45-5EWTP-QR-PCB User Manual
Page 2

4. Set the RJ45 connector into the housing such that the snap handle is in the notch.
5. Make certain that the seal ring is fully-seated into the housing.
THIS STEP IS EXTREMELY IMPORTANT TO ENSURE A WATER-TIGHT SEAL!
6. Plug the assembly into the socket on the enclosure and secure the screw nut. Then apply the sealing nut
and securely tighten.
MAN121 REV. 4/9/10
Seal ring fully-seated
Seal ring fully-seated
Snap handle
Securely tighten sealing
nut to housing.