3 camera configuration – Veo 802.11b User Manual
Page 19

Page 19 of 69
3.3 Camera Configuration
1. Click the Setup button at the top of the main page to access the configuration pages.
Camera Information
The following settings are found on the Camera Information page:
Setting
Description
Valid Entries
Default
Camera Name
A name you assign to the camera
to help identify it. The name is
displayed on the main page.
Up to 12 ASCII characters
None
Location
Enter the camera location such as
front door, stock room, etc.
Up to 18 ASCII characters
None
Disable Power
Status Light
Disables (turns off) the
power/status indicator light.
Enable/Disable
Enabled