Vestax PCV-150 - Manual (Page 7)

6
L
SUB MASTER
TRANSFORMER
CF ASSIGN CF ASSIGN
TRANSFORMER
CUE OUT MASTER CUE MASTER
OUT
BALANCE
LINE
5
MIN MAX MIN MAX MIN MAX
L R
OUTPUT
CROSS FADER
MAX
+6 dB
+6 dB
+6 dB
PGM 1
PGM 2 PGM 3
PGM 4
PCV-150 / PROFESSIONAL MIXING CONTROLLER
FOR THE CREATIVE DJ / PRODUCER
ALLOWS YOU TO CREATE YOUR OWN MUSIC WITH
VESTAX'S UNSURPASSED ENGINEERING AND DESIGN.
MASTER LEVEL
150
L
R
-20 -16 -12 -10 -8 -4 -2 0 +2 +4 +8 +12 dB
15
18
16 10
12 21
22
23
20
17
19
!2INPUT EQ-LOW(Equalizer Low)
Auxiliary bass knob. Boosts of +6dB and cuts of -
24dB are possible at 80Hz.
!3CUE SWITCH
Used to send the signal to the monitor section for
head phone.
!4INPUT FADER
Used to adjust input level of the various PGM
channels. Usually at 7-8.
!5PEAK LEVEL METER
The bar graph level meters indicate the peak L&R
output.
!6SUB MASTER OUTPUT LEVEL
Adjust the signal level output from SUB MATER
OUT jack on the rear panel.
!7CUE OUTPUT LEVEL
Adjust the signal level output from CUE OUT jack
on the rear panel.
!8MASTER BALANCE
Determines balance between left and right channels.
!9MASTER OUTPUT LEVEL
Adjust the signal level output from MASTER OUT
jack on the rear panel.
@0MASTER CUE SWITCH
Used to send the signal to the monitor section for
head phone.
@1CROSS FADER
Mixes the signals assigned by CROSSFADER
ASSIGN SWITCH (
@2
) to left side of the crossfader
and right side. When the crossfader is in the center
position, both left and right signals can be heard.
This is a detachable feder for ease of replacement
with CF-PCV when it is worn out.
@2CROSSFADER ASSIGN SWITCH
Used to assign the signals from each of the PGM
channels to either side of the crossfader or to the
master section.
@3TRANSFORMER SWITCH
With the crossfeder moved to either right or left, the
opposite program can be heard instantly by pressing
the opposite transformer button.