Velodyne Acoustics SMS -1 - Manual (Page 47)

41
.
w w w . v e l o d y n e . c o m
Digital Drive User’s Manual
Following are special remote codes and their functions. Unless otherwise noted, the codes are
active only on the cover page.
Function Code Description
Self-EQ 3-2-1 Initiates Self-EQ feature.
Be sure to connect the
microphone before engaging.
Press RESET to cancel
prematurely. After 25 sweeps,
the unit saves and resets.
Restore defaults 8-9-0 Restores defaults and
resets the SMS-1.
Switch to DOWN ARROW The unit restarts in
PAL/SECAM 4 times followed PAL/SECAM video mode.
video by RESET TO restore NTSC mode,
restore defaults.
Display serial number UP ARROW 4 times Shows the serial number
then SELECT of the unit at the top
of the screen.
Restore last saved RESET If volume is changed,
volume restores last
saved volume.
Appendix B: Summary of Special Remote Codes