Vivotek IP3111/IP3121 - Manual (Page 61)

www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097
60
One-shot fast configuration via FTP
For quick setup of NetworKam, the administrator can utilize the default CONFIG.INI that may be
downloaded from the FTP daemon of NetworKam. To log into the FTP daemon, enter “root” as the user
name and the same password used when connecting to the Web server. The serial number of NetworKam
is the password for the initial access.
Then administrators only need to modify necessary fields and then upload the file to NetworKam with the
file name “CONFIG.INI”. To reduce error in interpretation, it is recommended that the downloaded
template CONFIG.INI be modified using the options following each item in the sample below. The file
will include seven categories: [SYSTEM], [NETWORK], [VIDEO], [SERIAL], [ALERT],and
[LAYOUT]. The category name in brackets should be in upper case. The item name in angle braces
should be in lower case. Some items related to disable/enable should use the keywords “YES”/“NO”. The
number zero entry in and is for the administrator, i.e. “root”.
Since the password when logging into FTP is not encrypted, it is recommended to use the Web instead of
FTP to configure the system afterwards. If some parameters other than the network or camera drivers are
changed, administrators can set to NO to avoid resetting the system. It will automatically
return to YES during the next downloading of CONFIG.INI.
A sample CONFIG.INI is attached below. The italic text following each line describes the format of the
field and the bold italic characters are the possible values of each field.
******* sample file **********
NetworKam Initial Configuration File
[SYSTEM]
YES Reset system after reading CONFIG.INI or NO
NetworKam String shorter than 40 characters