Vestax PDX-2300MkII EN - Manual (Page 11)

10
Fit the EP adapter over the center spindle and follow the same
playing instructions as written above.
A detachable stylus light is available for this unit.
Stylus light (Detachable mini light)
OPERATION
q Place a record on the slip mat.
w Switch on the unit using the Power on/off switch located on
the rear panel.
e Remove the stylus protector if applicable.
r Start the platter spinning with the START/STOP button.
The START/STOP functions of the PDX-2300MkII can be controlled
externally with equipment such as a foot switch peddle. An input
jack is provided for this remote control on the rear panel of this unit.
Remote Control
t Position the tone arm over the record and gently lower to begin
playback.
y Set the playing speed to either 33 1/3 or 45 RPM.
If the power switch is turned off without pressing the
START/STOP button, the electric brake will not
function.
u Move the tone arm to the resting position and secure using the
tone arm clamp.
i Push the START/STOP button to stop the platter from
spinning.
o Turn the unit off.
Playing EP records
When turned on this unit is set to play at 33 1/3 RPM.
To adjust to a 45RPM speed setting, press the 45
RPM button. This unit does not use a cue lever
system for speed setting(s).