Vision Fitness T9100 - Manual (Page 24)

20
GENERAL
TENSIONING THE BELT
If the running belt slips when used, use the supplied 6 MM Allen wrench to
turn the left and right tension bolts clockwise 1 /
4
-turn at a time until the belt
no longer slips.
CENTERING THE BELT
If the running belt is too far to the right side, use the supplied 6 MM Allen
wrench to turn the right tension bolt clockwise 1 /
4
-turn at a time until the
belt remains centered during use.
If the running belt is too far to the left side, turn the left tension bolt
clockwise
1 /
4
-turn at a time until the belt remains centered during use.