Vista Imaging VFSM15 - Manual (Page 6)

2.SETTING UP
Read this chapter for important safety information and how to set up and connect the display to your
computer or camera.
¾Check the attachment of monitor. There are power cord, user’s manual and PC signal cable.
¾Make sure the surface for placing the LCD monitor is stable and level.
¾Keep the monitor away form sources of liquids and moisture.
¾Keep the monitor’s vents free from obstruction.
¾If you will not be using the monitor and computer for a day or more, make sure to turn off the
computer and turn off the main switch of the monitor.
2.1 CONNECT THE MONITOR TO YOUR COMPUTER
¾Make sure the computer is turned off.
¾Plug in the monitor.
¾Connect the PC signal cable of the computer to the monitor.
¾Turn on the computer.
¾Turn on the main switch of the monitor.
¾Push the power button in front of the monitor.
¾Push the channel button to display PC input signal.
2.2 CONNECT THE MONITOR TO THE VIDEO SOURCE
¾Plug in the monitor.
¾Connect the video signal to the monitor.
¾Turn on the main switch of the monitor.
¾Push the power button in front of the monitor.
¾Push the channel button to display video input signal.
5