Vivitar ViviCam 5018 - Manual (Page 16)

15
that appear on the screen.
Format
This function will delete all of the files in your camera ’s memory (internal memory or SD memory card,
depending on the device selection). Please be certain that you wish to use this function:
1. Press the Menu button.
2. Press the Up/Down button to select the Format option.
3. Press the Menu button.
4. Press the Up/Down button to select either “Yes” or “No”.
5. Press the Shutter button again to confirm your selection.
6. A
“Format OK” message will appear on the LCD once the format has completed.
Installing PhoTags Express Software
NOTE: Before attempting to install the software, make sure that you do not hav e the camera’s USB
cable attached to your computer. This will affect the install process and can cause a failed installation
of the camera software and drivers.
In order to install the Software and drivers to download and edit the photos and videos captured using this
camera, you need to install the CD installation disk.
Insert the installation CD into your CD-ROM drive. The installation screen should automatically open.
Warning: DO NOT PLUG YOUR CAMERA INTO THE USB PORT UNTIL THE SOFTWARE INSTALLATION
HAS BEEN COMPLETELY INSTALLED.