Victor GZ-MC100 - Manual (Page 26)

26
EN
MENU SETTINGS
You can change the menu settings to customize your
camera. Access the desired menu screen by following the
steps below, then change the various settings.
1
Select the operation mode.
For Recording Menus:
Set the power switch to
while pressing down the lock
button located on the switch.
For Playback Menus:
Set the power switch to
while pressing down the lock
button located on the switch.
2
Press MODE to select (video), (still image) or
(voice).
3
Press MENU. The menu screen appears.
4
Select the desired sub menu and menu item with rt
and 49.
● To return to the normal screen, press MENU.
● To display the operation guide, press INFO when the menu
screen is displayed.
[ ] = Factory-preset
BASIC SETTING
EXECUTE: Resets all settings to the factory-preset.
[CANCEL]: Returns to menu screen without executing
reset.
OFF: Disables the function.
[ON]: Activates demonstration mode and shows various
features on the display.
OFF: Turns off operation sound.
BEEP: The beep sounds when the power is turned on or
off, and at the beginning and end of recording.
[MELODY]: Instead of a beep, a melody sounds when any
operation is performed.
Changing the Menu Settings
Power Switch
Lock Button
MODE
49
INFO
MENU
r w
t e
NOTE:
Information on the following pages ( ੬ pg. 26 – 31) are only
excerpts of menu settings.
Refer to the advanced operation manual in the CD-ROM for
the full descriptions. (
੬ pg. 32)
Common Menus for All Modes
PRESET
DEMO MODE
OPERATION
SOUND