Basic dimensions, Important: please read and follow, Unpack – Viking 30-inch W User Manual
Page 2: Cabinet cutout cabinet installation
3
FRONT
SIDE
BASIC
DIMENSIONS
Model
B
C
27” W. 21-3/8” (54.3 cm)
24 1/2” (62.2 cm)
30” W. 24-1/2” (62.2 cm)
27 1/2” (69.9 cm)
36” W. 30-1/8” (76.5 cm)
33 1/4” (84.5 cm)
Model
D
27” W. 26-1/2” (67.3 cm)
30” W. 29-1/2” (74.9 cm)
36” W. 35-1/4” (89.5 cm)
B
23”
(58.4 cm)
27”
(68.6 cm)
1-13/32” (3.6 cm)
10”
(25.4 cm)
D
24-1/2” (62.2 cm)
C
2
IMPORTANT: PLEASE READ AND FOLLOW
•Before beginning, please read these instructions completely and carefully.
•The installer should leave these instructions with the consumer for future reference.
UNPACK
1. Locate the unit near installation area.
2. Remove all banding from around carton.
3. Remove all tape and packaging material from the outside and inside of the storage drawer.
4. Keep all carton packaging until your storage drawer has been thoroughly inspected and found to be in good
condition.
Model
A
27” W.
25” (63.5 cm)
30” W.
28” (71.1 cm)
36” W.
33-3/4” (85.7 cm)
CABINET CUTOUT
CABINET INSTALLATION
9-1/4”
(23.5 cm)
23 3/8”
(59.4 cm)
A
1. Slide drawer assembly into cabinet opening.
2. Open drawer
3. Permanently secure drawer to cabinet using the two
(2) #10 mounting screws provided
Mounting
screws
Mounting
screws