Vinotemp VVTT--FFUULLLLKKEEGG - Manual (Page 17)

17 1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
i n f o @ v i n o t e m p . c o m
BEER DISPENSER TROUBLESHOOTING GUIDE
You can solve many common problems easily, saving you the cost of a possible service call.
Try the suggestion below to see if you can solve the problem before contacting Vinotemp
at [email protected].
PROBLEM POSSIBLE CAUSE
Beer dispenser does not
operate
• Not plugged in.
• Circuit breaker tripped or a blown fuse.
• The temperature control knob is set in “OFF” position.
Turns on and off frequently • Room temperature is hotter than normal.
• Appliance door is open too often.
• Door is not closed completely.
• Temperature control is not set correctly.
• Door gasket does not seal properly.
• Beer dispenser does not have the correct clearances.
Vibrations • Check to assure that the beer dispenser is leveled.
Beer Dispenser seems to
make too much noise
• Rattling noise may come from the flow of the
refrigerant; this is normal.
• As each cycle ends, you may hear gurgling sounds
caused by the flow of refrigerant in your beer
dispenser.
• Contraction and expansion of the inside walls may
cause popping and crackling noises.
• Beer dispenser is not leveled properly.
Door will not close properly • Beer dispenser is not leveled.
• Door was reversed and not properly installed.
• Door gasket is dirty.
• The shelves, metal plate, or beer keg are out of proper
position.
TECHNICAL SPECIFICATIONS
Model No. V V T T - - F F U U L L L L K K E E G G
Power 115V/60Hz
Rated Current 1.4A
Power Input 115W
Power Consumption .09 kW.h/24h
Refrigerant R134a/3 oz
Size (W x D x H) 20.1" x 24.8" x 33.7"